Cloth Shredder Machine (Katran / Textile Waste)
Dual-shaft shredders configured for textile destruction — garments, fabric rolls, katran and cutting-room waste torn to strips, built to your fabric and volume rather than sold off one spec sheet.
Textile Streams Differ Too Much for One Spec Sheet
A machine that shreds denim jackets chokes on chiffon; one set up for katran fluff underperforms on laminated rolls. Textile shredding is the duty where honest manufacturers configure rather than catalogue — fabric type, form and volume decide feed width, cutter thickness and drive.
Our cloth shredders are the dual-shaft cross-cut platform configured to that brief: brand-protection destruction of rejected garments and labels, cutting-room katran reduced for disposal or fibre recovery, reject rolls fed end-first. Typical builds run 300–500 mm feeds at 3–7.5 HP — tell us your stream and we specify in writing.
For short, uniform fibre output — filler and flock feedstock — grinding beats shredding: see the cloth grinding machine. For elastic-heavy trim, the elastic configuration exists because elastic defeats everything else.
Key Features
- Configured to the fabric — woven, knit, coated or mixed — cutter and drive matched, not averaged.
- Garments destroyed brand-safe — labels, logos and rejected stock leave as anonymous strips.
- Rolls feed end-first — reject fabric rolls shred without unrolling.
- Katran volume-crushed — cutting-room waste compacts to a fraction of its haul volume.
- Proven platform — the same dual-shaft line that runs our 300–1000 mm machines.
- Specification in writing — you get the configured spec sheet with the quote — no vagueness.
Cloth Shredder — How We Specify It
| Configuration | |
|---|---|
| Machine type | Dual-shaft cross-cut, configured to your textile stream |
| Sizing basis | Fabric type (woven / knit / laminated), form (garments, rolls, katran) and daily kilos |
| Typical builds | 300–500 mm feed, 3–7.5 HP, cutter thickness selected to fabric |
| Output | Uneven strips and pieces — destruction and volume-reduction grade |
| Voltage | 415 V / 50 Hz / 3-phase |
Final specifications (feed width, HP, cutter thickness, throughput) are fixed in writing once we know your fabric and volumes — textile duty is configured honestly, not quoted from a generic table.
Part of the Dual-Shaft Line
This machine belongs to our dual-shaft cross-cut line — one engineering platform sized by feed opening. Two counter-rotating shafts with interlocked cutters grab, pull and tear the material; cutter thickness is selected to your feed and target shred. See the dual shaft shredder range for the full family.
Garments or katran leaving your plant recognisable?
Tell us your fabric types, forms and daily kilos — we’ll send the configured specification and quote within one working day.
Cloth Shredder — Frequently Asked Questions
Why is there no fixed spec table?
Because publishing one would mislead you: throughput on denim and on knit differs by multiples on identical hardware. We configure feed width, cutter thickness and drive to your actual stream and put the numbers in writing with the quote — accountable, not averaged.
What textile duties does it cover?
Rejected garments and brand-protection destruction, cutting-room katran, fabric roll rejects, tags and labels, and mixed tailoring waste. Elastic-dominant trim goes to the elastic waste shredder; fibre-output duties to the cloth grinder.
Can shredded textile be recycled?
Sorted single-fibre shred feeds fibre-recovery and shoddy processes; mixed and coated shred typically goes to energy recovery. Either way it leaves compact and anonymous — which is usually the point.
What is the price?
Configuration-dependent — send fabric samples and volumes and our team replies within one working day with specification and firm pricing.
Can we trial our fabric mix?
Yes — bring your actual material to our works in Andheri East, Mumbai, and watch it processed before you decide. A trial settles capacity and output questions better than any brochure.
Get a Free Quote for the Cloth Shredder
Tell us your fabric types, waste form and daily kilos. Our team replies within one working day with a written specification and firm price.
Call: +91 98700 12462
WhatsApp: Chat with our team
Email: rajelectricalsmumbai@gmail.com
Address: 102/103/104, Madhu Industrial Estate, Old Nagardas Road, Mogra Lane, Andheri East, Mumbai – 400069
Hours: Mon–Sat, 9:00 AM – 7:00 PM